2018 Can-Am Maverick X3 Turbo R

/
FAST FORWARD

It's time to put the "competition" in quotes: the X3 Turbo R is a factory-fresh side-by-side vehicle with the performance and control to leave rivals in the dust: 0-60 mph in less than 5 seconds, and 20-inches of suspension travel will do that.

Features

  • THRILLING POWER: 172 hp turbocharged and intercooled Rotax® ACE engine. Meet the king of side-by-side engines, the precision-engineered, industry-leading triple-cylinder Rotax ACE engine. Its 172 horsepower at 7,250 RPM and 124 lb-ft of torque at 6,500 RPM give searing speed, no matter the terrain. Tell your friends: 0-60 MPH in just 4.4 seconds*. *Based on BRP internal testing.
  • WIND THAT WORKS: Advanced airflow dynamics. With an intake and exhaust tuned to maximize power, efficiency, and throttle response, the Can-Am Maverick X3 will never be starved for performance. Three oversized, out-of-the-way intakes feed the engine and the CVT with clean air and keep temperatures low, with a sport exhaust out back to let the Rotax ACE engine roar.
  • CLEVERLY CAGED: Ultra efficient and lightweight chassis. The Maverick X3 features an ultralight, rigid chassis made of state-of-the-art Dual-Phase 980 steel. So? Figure 53% better torsional stiffness and still 20% lighter than its closest competitor.
  • NO TORQUE INTERRUPTION: Shiftless QRS-X transmission. A compact, high-performance QRS-X CVT has been calibrated to work with the turbo to virtually eliminate lag, without shifting or torque interruption to slow you down. Its large drive – a long, wide, and think belt – is our most robust three-roller pulley design yet.
  • SUSPEND BELIEF: Can-Am's all-new four-link TTX suspension with 20-in of travel features a trophy truck-like trailing arm and three links dedicated to controlling camber while delivering optimal geometry at all times, even during extended wheel travel. The result? Unparalleled power transfer to wheels, virtually no bump steer, precise steering response, and more confidence at higher speeds.
  • HONED HANDLING: From its arched double tubular A-Arm and sway bar up front to its race-inspired quick-ratio D-shaped steering wheel, Tri-Mode DPS system, and Intelligent Throttle Control (iTC), the Maverick X3 provides precise handling even in rough terrain or at high speed
  • DRIVER-FOCUSED: Everything is in its right place, from the sports car-like centered accelerator and brake pedals to race-inspired, flat-bottom steering wheel that tilts up or down 25°. The four-way adjustable seats – 2 inches in height and 6 inches in slide, ease of accessorization, and integrated wiring allow it to truly adapt to its owner.
  • PERFECT POSITION: Its low seating arrangement is designed to encapsulate both driver and passenger so they feel connected to the vehicle’s every move, without compromising ground clearance at up to 15 inches. Its high and dominant posture is enhanced with race car-inspired one-piece molded seats with ideal support, weight distribution, and 4-way adjustablility.
  • UNMISTAKABLY FIERCE: The Maverick X3's intensity comes from a mix of performance-driven mechanical and structural design, from its signature LEDs to its advanced cockpit. Here, designers have selected a simply stunning shade of white to enhance its lines and provide optimal visibility off-road.
  • RUGGED WHEELS AND TIRES: Roll on with strong 14-in aluminum wheels and 28-in Maxxis Bighorn 2.0 six-ply tires. Built to withstand rough terrain, sturdy lugs and a non-directional tread pattern ensure a smoother ride.
  • STUNNING SUSPENSION: The Maverick X3 features Fox 2.5 Podium HPG Piggyback shocks with front and rear QS3 compression adjustment and rear bottom-out control for a balanced, factory-honed setup right out of the box.
  • ALL CONDITIONS COVERED: Be ready for varying conditions such as desert, dunes, rocks or trails with quarter doors and a dominant vehicle posture for optimal off-road capability with no compromise to line-of-sight.

General Information

Manufacturer Can-Am
Model Year 2018
Model Maverick X3 Turbo R
Model Code 7XJA
Color White

Brakes/Wheels/Tires

Brakes

Front - Dual 262 mm ventilated disc brakes with hydraulic twin-piston calipers

Rear Brake - Dual 248 mm ventilated disc brakes with hydraulic twin-piston calipers

Wheels 14-in. (35.6 cm) aluminum
Tires

Maxxis Bighorn 2.0

Front - 28 x 9 x 14 in. (71.1 x 22.9 x 35.6 cm)

Rear - 28 x 11 x 14 in. (71.1 x 27.9 x 35.6 cm)

Dimensions

Length 131 in. (332.7 cm)
Height 66 in. (167.6 cm)
Width 64 in. (162.5cm)
Weight Estimated Dry - 1,470 lb. (666.9 kg)
Ground Clearance 14 in. (35.6 cm)
Wheelbase 102 in. (259.1 cm)

Drivetrain

Transmission Quick Response System X (QRS-X) CVT with high airflow, L / H / N / R / P
Drive System Selectable 2WD / 4WD with Visco-Lok‡ X auto-locking front differential

Electrical

Lighting LED headlights and tail lights with unique Can-Am LED signature
Instrumentation Lighter type DC outlet in central console

Engine

Engine Rotax ACE (Advanced Combustion Efficiency) Turbocharged Triple-cylinder engine
Horsepower 172 hp
Displacement 900 cc
Fuel System Intelligent Throttle Control (iTC™) with Electronic Fuel Injection (EFI)
Fuel Tank Capacity 10.5 gal (40 L)
Cooling Liquid cooled with integrated intercooler and Donaldson† high-performance air filter

Operational

Steering Tri-Mode Dynamic Power Steering (DPS™)
Suspension

Front - Double A-arm with sway bar; 20 in. (50.8 cm) travel

Rear - 4-link Torsional Trailing-arm X (TTX) with sway bar; 20 in. (50.8 cm) travel

Front Shocks - FOX 2.5 PODIUM Piggyback with QS3 compression adjustment

Rear Shocks - FOX 2.5 PODIUM Piggyback with QS3 compression adjustment and bottom-out control

Frame Cage / Chassis - Dual-phase 980 steel, fully welded
Load Capacity Rear Rack - 200 lb. (91 kg) with LinQ™ quick-attach

Other

Safety Features Integrated front bumper, full High Molecular Weight (HMW) skid plate and quarter-doors
Warranty

Factory - 6-months limited warranty

Extended - Up to 30 months B.E.S.T. coverage